Parameters of the 12 Default Profiles

[admin]

There are 12 execution profiles available by default, each configured with the following parameters:

Cut [Post Silence]:

Code: Select all

ar=1,bs=1,cl=4,em=1,im=1,mf="Cut Files",pv=1,sn="Cut [Post Silence]"

Cut [Silence Boundaries]:

Code: Select all

ar=1,bs=1,em=1,im=1,iv=1,mf="Cut Files",pv=1,sn="Cut [Silence Boundaries]"

Cut [Into 3 Parts]:

Code: Select all

ar=1,be=1,dn=3,em=1,im=1,iv=1,mf="Cut Files",pv=1,sn="Cut [Into 3 Parts]"

Cut [Every 5 Seconds]:

Code: Select all

ar=1,be=1,dn=5,du=1,em=1,im=1,iv=1,mf="Cut Files",pv=1,sn="Cut [Every 5 Seconds]"

Join [End Position]:

Code: Select all

em=1,im=1,iv=1,iw=2,mf="Join Files",pv=1,sn="Join [End Position]"

Join [Any Position]:

Code: Select all

em=1,il=2,im=1,iv=1,iw=2,mf="Join Files",pv=1,sn="Join [Any Position]"

Join [Every 5 Files]:

Code: Select all

ar=5,em=1,im=1,iv=1,mf="Join Files",pv=1,sn="Join [Every 5 Files]"

Join [Quick]:

Code: Select all

ac=1,ae=1,cd=0,em=1,eo=0,ff=1,hr=1,im=1,mf="Join Files",pv=1,sc=2,sn="Join [Quick]",sv=1

Fade:

Code: Select all

ar=1,em=1,ib=60.0,im=1,is=3.00,mf="Fade",mi=0,oc=60.0,os=3.00,pv=1,ri=1,sn="Fade"

Append Silence:

Code: Select all

ar=1,em=1,im=1,mf="Silence Appended Files",pv=1,sl=1.0,sn="Append Silence",su=1

Create Silence:

Code: Select all

ar=1,em=1,im=1,mf="Silence Files",pv=1,sl=1.0,sn="Create Silence",sq=2,su=1

Create M3U Playlist:

Code: Select all

ar=1,ee=0,et=1,il=2,im=1,iw=2,pv=1,sn="Create M3U Playlist",tf="Playlist",tu=1

By adding "SetTemp" to these parameter strings and entering them into the command input box on the main screen,
you can create temporary profiles that provide the same editing functions as the original profiles.
These temporary profiles remain active only until the program is closed. For example:

Code: Select all

SetTemp,ar=1,be=1,dn=3,em=1,im=1,iv=1,mf="Cut Files",pv=1,sn="Cut [Into 3 Parts]"

Code: Select all

SetTemp,ar=5,em=1,im=1,iv=1,mf="Join Files",pv=1,sn="Join [Every 5 Files]"

You can also adjust the editing behavior by changing the parameter values, For example:

Code: Select all

SetTemp,ar=1,be=1,dn=10,em=1,im=1,iv=1,mf="Cut Files",pv=1,sn="Cut [Into 10 Parts]"

Code: Select all

SetTemp,ar=3,em=1,im=1,iv=1,mf="Join Files",pv=1,sn="Join [Every 3 Files]"